AMSOIL Synthetic Water Resistant Grease
AMSOIL Synthetic Water Resistant Grease provides Superior Lubrication and Protection in Marine, Automotive and Industrial Applications.It Resists water washout and degradation and provides unparalleled protection for boat trailer wheel bearings and other components frequently exposed to water. This grease stays in place, lubricates and protects against rust.
AMSOIL Synthetic Water Resistant Grease is an extreme-pressure grease formulated specially for wet-duty performance. Composed of premium-quality synthetic base oils and calcium-sulfonate complex thickeners, Water-Resistant Grease provides exceptional film strength, shear resistance, adhesion properties and mechanical stability. Its water-washout and sprayoff resistance are outstanding for applications frequently exposed to water, mud, snow or ice, including ATVs, UTVs, snowmobiles and boat trailers.
Water-Washout and Sprayoff Protection
The superior wet-duty performance of AMSOIL Synthetic Water-Resistant Grease is formulated with extra durable cohesive and adhesive chemistry. It holds together when exposed to water and clings tenaciously to metal surfaces when wet, protecting components during prolonged exposure to standing or pressurized water.
Frequent or prolonged water contact can increase corrosion, resulting in damage to metal surfaces and compromised components. Water-Resistant Grease seals metal surfaces and chemically fights corrosion, making it ideal for applications with extensive exposure to water, mud, snow or ice.
Load-Carrying and Extreme-Pressure Performance
AMSOIL Synthetic Water-Resistant Grease protects components from metal-to-metal contact even under heavy loads. Its extreme-pressure additives protect against sustained or sudden extreme loads for dependable protection against wear.
AMSOIL Synthetic Water-Resistant Grease meets the highest performance standards set by the National Lubrication Grease Institute (NLGI) for wheel bearing applications (GC) and chassis applications (LB). It may be used in automotive wheel bearings, chassis or other applications for which an NLGI #2 GC or LB grease is recommended.
Maintaining a clean work environment is important when equipment greasing is performed. Wipe grease fittings clean prior to injecting grease to prevent contaminant ingestion. Maintain bearing housings one-third to one-half full of grease. Do not over-grease, as excessive heat buildup can result. Supplement standard grease maintenance by cleaning and packing housings with fresh grease on an established maintenance schedule.
AMSOIL Synthetic Water Resistant Grease is compatible with many other types of greases. However, it is recommended that, when changing greases, the equipment be cleaned of the old grease when possible or flushed with a liberal amount of Water-Resistant Grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Grease compatibility questions should be referred to your AMSOIL representative or AMSOIL INC.
AMSOIL PRODUCT WARRANTY
AMSOIL products are backed by a Limited Liability Warranty.
HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Safety Data Sheet (SDS). An SDS is available via the Internet at www.amsoil.com or upon request at (715) 392-7101. Keep Out of Reach of Children.
For detailed typical technical properties, download the product data bulletin.
GWR Packaging Information
Code Package Size Unit of Measure Product
GWRCR (GWRCR-EA) 14-Oz. Cartridge Each Synthetic Water Resistant Grease
GWRCR (GWRCR-CA) 14-Oz. Cartridge Case of 10 Synthetic Water Resistant Grease
GWRCR (GWRCR-PK) 14-Oz. Cartridge Pack of 40 Synthetic Water Resistant Grease
GWR3P (GWR3P-EA) (3) 3-oz. cartridges Each Synthetic Water Resistant Grease
GWR3P (GWR3P-CA) (3) 3-oz. cartridges Case of 10 Synthetic Water Resistant Grease
GWR35 (GWR35-EA) 35-Pound Lug Each Synthetic Water Resistant Grease
GWR99 (GWR99-EA) 120-Lb. Keg Each Synthetic Water Resistant Grease